Bookme

bookme for Recruiters and HR

Use case guide

bookme for Recruiters and HR

Hiring runs on calendars: candidates, hiring managers, panels, time zones. bookme lets candidates pick a slot themselves and lets panels book without a spreadsheet of availability.

7 setup lessonsWith screenshots and a video tourUpdated October 2026

What you will learn

  • Create an event type
  • Ask the right questions before the meeting
  • Connect your calendar so you never double book
  • Choose how the meeting happens
  • Share meetings across a team
  • Automate reminders and follow ups
  • Record what happened after each meeting

Who this is for

In house recruiters, agency recruiters, talent partners, HR generalists and hiring managers who schedule screens, interviews and onboarding calls.

Hiring is a race. A candidate who waits three days for an interview slot may already have another offer. Yet most of the delay is not decision making, it is calendar coordination between a candidate, a recruiter and one or more interviewers.

bookme takes the coordination out. Candidates choose from times the team has already approved, and every confirmation includes the video link and a way to reschedule.

The scheduling problems in recruiting and HR

Interview scheduling eats the day
Every candidate needs a round of emails to find a time that also works for the interviewer. A recruiter handling twenty open roles can spend most of the day sending times. Each message also depends on a reply that may come tomorrow.
Panels are hard to align
Putting two or three interviewers and one candidate in the same slot means comparing several calendars by hand. A final round with three interviewers means three calendars and one candidate. Without tooling, someone builds a table of overlaps by hand.
Candidates in other time zones
Offered times in the wrong zone lead to missed or late interviews. A candidate who sees 3 pm and thinks it is their time zone may miss the call entirely. Times shown in the invitee’s own zone avoid that.
Candidates forget or drop off
Without reminders, no shows rise, and each one wastes interviewer time. No shows waste interviewer time and slow the process. Reminders and a simple reschedule link keep people on track.

How bookme solves it

See bookme in action

This short tour shows the dashboard you will use in the steps below: your events, meetings and settings in one place.

A short animation touring the bookme dashboard.
A quick tour of the bookme dashboard.

Set it up step by step

1

Create an event type

One event per interview stage keeps lengths and attendees clear.

An event type is a meeting you offer, such as a 30 minute intro call. The Create event wizard builds one in five steps and keeps nothing public until you publish.

  1. On the Events page click + Create. The wizard lists five steps: Type & name, Details, Availability, Questions and Review.
  2. Name the event and choose Just me or My team, then choose Free or Paid.
  3. In Details set the description, the duration and the location: Google Meet, Zoom, brandID Meet, Phone call or In person.
  4. In Availability choose a schedule, how much notice you need, how far ahead people can book, an optional cap on bookings per day and buffers before and after each booking.
  5. Click Publish event, then use Copy link on the Events page to get the event’s direct link.

For recruiting and HR:

  • Create Screen, Technical and Final events with their own lengths.
  • Name them the way candidates would expect.
Step 1 of the Create event wizard with the event name field, the Just me and My team choice and the Free or Paid choice.
The Create event wizard, step 1.
The Events page listing event types with duration, location, price, a Copy link button and an eye preview icon.
The Events page after you publish.
Tip. Moving past step 1 saves a draft, and nothing is live until you publish, so you can practise safely.

Full guide: how to create an event type.

2

Ask the right questions before the meeting

Two screening questions are enough for a first call.

A question form adds your own questions to the booking page, so you know what you need before the meeting. You build it once and reuse it on as many events as you like.

  1. Click Question Forms in the sidebar, then + New Form, and give the form a clear name.
  2. Add one row per question. Give each a label, choose a type (short text, long text, dropdown, radio or checkbox) and decide whether it is required.
  3. Keep it to three or four questions and put the most useful one first. Drag rows to change the order.
  4. Click Save, then assign the form to one or more event types, or pick it in the Questions step of an event.
  5. Read the answers in your calendar invite, your booking email, the invitee’s confirmation and the booking in Meetings under What they told you.

For recruiting and HR:

  • Ask notice period and location, and optionally a portfolio link.
  • Keep salary talk for the conversation unless you need it up front.
The New Pre-Meeting Question Form dialog with Form Name and a first field with a label and type.
Building a question form.
Tip. Name and email are always asked, so do not repeat them. Each extra question lowers the share of people who finish booking.

Full guide: how to ask the right questions before the meeting.

3

Connect your calendar so you never double book

Interviewers need connected calendars so candidates only see times that work.

Connect your Google Calendar so bookme blocks the times you are already busy and adds every new booking to your calendar. It takes about a minute.

  1. Click Integrations in the sidebar and open the Calendars filter.
  2. Click Connect on the Google Calendar card, choose the account and approve access in Google.
  3. Your busy time starts blocking slots on your booking page, and new bookings are written to your calendar as they happen.
  4. Check the row’s status. If it says Needs reconnect, click Reconnect.

For recruiting and HR:

  • Ask each interviewer to connect Google Calendar.
  • Check the connection status before the first booking.
The Integrations and Apps page with filter tabs for All, Connected, Calendars and Payments.
The Integrations page.
Tip. Google Calendar is the supported calendar today. Outlook is shown as coming soon on the Integrations page.

Full guide: how to connect your calendar so you never double book.

4

Choose how the meeting happens

Every interview needs a join link candidates can trust.

Choose the video tool for each event type and bookme puts a join link in every booking. brandID Meet needs no setup, Google Meet needs a connected Google Calendar, and Zoom needs a one time connection.

  1. Use brandID Meet with nothing to connect. Each booking gets its own room that runs in the browser, so the invitee installs nothing.
  2. To use Zoom, open Integrations, find the Zoom card, click Connect and authorize.
  3. To use Google Meet, connect Google Calendar. bookme then creates a Meet link inside the calendar event for each booking.
  4. Set the location per event type in the Details step: Google Meet, Zoom, brandID Meet, Phone call or In person.
  5. Find the join link on any booking in Meetings, where Join and Copy link appear.

For recruiting and HR:

  • Choose Google Meet, Zoom or brandID Meet per stage.
  • Use Phone call for quick screens.
The Integrations and Apps page with the Video filter tab next to Calendars and Payments.
Video tools live on the Integrations page.
Tip. Each event can use a different location, so a phone intro and a video session can sit on the same booking page.

Full guide: how to choose how the meeting happens.

5

Share meetings across a team

A collective event offers only times when every interviewer is free.

A team event lets several bookme users host the same booking, either all together or by taking turns.

  1. Check your plan first. Collective and round robin events are on the Elite plan.
  2. In the Create event wizard choose My team under Who runs this event.
  3. Choose how the team hosts: Everyone attends (collective), where a time is offered only when every required host is free, or Take turns (round robin), where one host takes each booking.
  4. Add co hosts by bookme username, by email or with an invite link. Each stays Pending until they accept.
  5. Publish the event, then manage it from Team Events.

For recruiting and HR:

  • Add the hiring manager and team lead as required hosts.
  • Remember collective events are on the Elite plan.
The Team Events page with Pending invitations and a My collective events list.
The Team Events page.
Tip. Invitations you queue while the event is a draft are sent when you publish, so check the host list before you do.

Full guide: how to share meetings across a team.

6

Automate reminders and follow ups

Reminders reduce no shows and keep interviewers prepared.

An email workflow sends an email when something happens around a meeting: before it, after it, or when it is booked, cancelled, rescheduled or marked with an outcome.

  1. Click Reminder Workflows in the sidebar, then + New Email Workflow, and name it, for example 24-hour reminder.
  2. Under When this happens choose a trigger: Before event, After event, Event booked, Event cancelled, Event rescheduled or Meeting outcome marked.
  3. For before and after triggers pick a timing chip such as 15 min, 1 hour or 24 hours, or enter your own.
  4. Choose which event types it applies to, leave it empty for all, and write the subject and body. You can insert merge variables such as {{invitee_name}} and {{event_name}}.
  5. Click Create Workflow and test it first with your own address.

For recruiting and HR:

  • Send a reminder 24 hours before and one hour before.
  • Add a thank you after the interview.
The New Email Workflow window with the triggers under When this happens.
Creating an email workflow.
Tip. A workflow that emails the invitee sends real email to real people, so always test with a booking of your own.

Full guide: how to automate reminders and follow ups.

7

Record what happened after each meeting

Outcomes tell you who is waiting for a next step.

After a meeting ends, tell bookme what happened: Met, No-show, I missed it, or Decided to reschedule. Your answer sets the booking’s status and can send a follow up email to the invitee.

  1. Find the meeting that needs an outcome in the check in email sent five minutes after it ends, in the Just ended band on the Meetings page, or in the booking itself.
  2. Pick the outcome: Met, No-show, I missed it or Decided to reschedule.
  3. Review the window that opens. It shows a private note box and the follow up email exactly as the invitee will see it.
  4. Leave Email them now on to send it, or switch it off to save only your note.
  5. Later, use the Outcome filters on the Meetings page to review what happened.

For recruiting and HR:

  • Mark each interview as Met, No-show or Decided to reschedule.
  • Review outcomes at the end of the week.
The Outcome filters on the Meetings page: Any, Met, No-show, I missed it and Rescheduling.
Outcome filters on the Meetings page.
Tip. Each outcome matches one workflow, so you can edit the follow up wording on the Reminder Workflows page.

Full guide: how to record what happened after each meeting.

Case study: a recruiter scheduling first round screens and panel interviews

A recruiter at a growing company creates a 20 minute phone screen event for every open role, with two questions: notice period and salary expectations. Candidates who pass get the link in the reply email and book themselves.

For the final round, the recruiter creates a collective team event with the hiring manager and a team lead, so the candidate only sees times when both are free. A reminder goes out before each interview, and after each one the recruiter records the outcome.

After each interview the recruiter records the outcome, so candidates who met get a thank you with next steps and anyone who missed gets an invitation to rebook. Hiring managers see only the slots they approved.

This is an illustrative scenario, not a customer result. Your numbers will vary.

A typical week with bookme

On Monday, the recruiter sends screen links to ten candidates. By Tuesday, most have booked themselves. For finals, the hiring manager and a team lead are offered together, and candidates see only shared free times. Each interview is recorded as met, missed or rescheduled, and the right email goes out.

At the end of the week the recruiter sees at a glance which candidates are waiting for a next step.

Launch checklist for recruiting and HR

Tick these off before you share your link.

  • Each stage has its own event.
  • Interviewers have connected calendars.
  • The video location is set on every event.
  • Panel events list every required host.
  • Reminders and outcomes are switched on.

Common mistakes to avoid

  • Offering too many slots, which spreads interviewers thin.
  • Not setting a minimum notice, so same hour interviews catch teams unprepared.
  • Skipping reminders, which raises the no show rate.

Tips that make it work

  • Use one event per stage. Screens, technical and final rounds have different lengths and attendees.
  • Ask two questions at most. Notice period and location are enough for a first screen.
  • Make reschedule easy. Candidates who can change time themselves are less likely to simply disappear.
  • Tell interviewers what is booked. Share the calendar invite so they know who is coming and when.

Let your AI assistant do the setup

bookme works with Claude, ChatGPT and other MCP apps, so you can describe what you want in plain words and let your assistant build it. Anything that reaches another person, such as cancelling a meeting or emailing an invitee, waits for your approval first. Here is an example request for recruiting and HR:

Create three events called Phone screen 20 minutes, Technical interview 45 minutes and Final panel 60 minutes, each with Google Meet and a question about notice period.

A short animation of an AI assistant creating events and asking for approval in bookme.
Watch an assistant run bookme from a chat.

Setup guide: how to connect Claude to bookme.

Words you will see

  • Event type. A meeting you offer, with its own length, location, price and rules.
  • Schedule. A set of weekly hours that events can follow.
  • Booking window. How much notice you need, and how far ahead people can book.
  • Buffer. Time kept free before or after a booking.
  • Question form. Custom questions invitees answer before they book.
  • Collective event. All hosts attend, and a time is offered only when every required host is free.
  • Round robin. Hosts take turns, with one host per booking.
  • Email workflow. An email sent automatically before, after or around a meeting.
  • Outcome. What happened to a meeting: Met, No-show, I missed it or Decided to reschedule.

Frequently asked questions

Can candidates reschedule on their own?
Yes. The confirmation includes a reschedule link, so they do not need to email you.
Can several interviewers share one slot?
Yes, with a collective team event on the Elite plan.
Do candidates need an account?
No. They open the link and book.
Can I ask screening questions?
Yes. Attach a question form to the event.
Can hiring managers connect their own calendars?
Yes. Each host connects a calendar so only free times are offered.
Can I send a different video link per stage?
Yes. Set a video location on each event type.

Ready to try it?

Create an event for your next open role and send the link with your first reply to a candidate.